Skip to main content

Polycom Manual Configuration - Knowledgebase / Handsets and Device Provisioning / Polycom Devices - Help & Support

Polycom Manual Configuration

Authors list

Polycom Manual Configuration

Manual configuration

You can quickly configure a handset by supplying four simple pieces of information in 2.1 with all other steps being optional.

  1. Retrieve the handset IP address: Home (Button) > Settings > 4. Status > 2. Network > 1. TPC/IP.

  2. Web UI: Enter IP address (eg into your browser.

  3. Settings > Lines (select Line).

Follow instructions from the image below

  1. SIP Protocol: Enable.

  2. Identification: Display Name, Address (must be full DID), Label (usually same as Display Name).

  3. Authentication: User ID (full DID), Phone’s password from your switchboard, Disable Credentials.

  4. SIP Server 1: – Expires 180


Helpful Unhelpful