Yealink Dect Cordless handsets

Supports W52, W56, W70, W76

Yealink DECT handsets are compatible with our device provisioning system. However, to complete the installation you'll need to manually pair each handset with its base station. This final one minute step, is not covered by Yealink's automatic provisioning services.

Step 1: Base Station - Press and hold <Pager Button>

Step 2: Handset - Press <Reg key>

Step 3: Handset - status > Easy Pairing

Step 4: Handset - status > Handset Subscribed

Step 5: Handset - Handset Registered

Factory Reset

If you are bringing a used Yealink DECT handset to 2talk we recommend first factory resetting the unit.

Press OK to enter the main menu.

Step 1: Select Settings>System Settings>Base Reset.

Step 2: Enter the system PIN (default: 0000), and then press the Done soft key.

Step 3: Highlight Reset to factory, and then press the OK soft key.

Step 4: The resetting process may take a few minutes. Do not power off until the base station starts up successfully.

See also: Yealink Device Provisioning