Polycom Manual Configuration

Manual configuration

You can quickly configure a handset by supplying four simple pieces of information in 2.1 with all other steps being optional.

1. Retrieve the handset IP address: Home (Button) > Settings > 4. Status > 2. Network > 1. TPC/IP.

2. Web UI: Enter IP address (eg 192.168.1.11) into your browser.

3. Settings > Lines (select Line).

Follow instructions from the image below

1. SIP Protocol: Enable.

2. Identification: Display Name, Address (must be full DID), Label (usually same as Display Name).

3. Authentication: User ID (full DID), Phone’s password from your switchboard, Disable Credentials.

4. SIP Server 1: plus.2talk.com – Expires 180