We treat the Yealink base station like any handset with multiple lines so there’s nothing special about configuring this family of phones using our Device Provisioning service.
- MAC Addresses: If you’ve purchased your phone through another reseller you will need to tell us the MAC address of the base station to enable us to associate that address with our Yealink partner account. If the phone was purchased through us you can disregard this step.
- Device Provisioning: Log into YourCloudPBX > YourCloudPBX > Device Provisioning (supply MAC address: add lines (in this case each phone will be a new line).
Step 1: Base Station
- The W52P base station can be powered by the supplied 120/240v adaptor or alternately from a POE switch.
- Install the 2 x AAA rechargeable batteries into the handset (and recharge if required).
- Enter the IP address in your browser (eg 192.168.1.xx).
- To find the base station web UI IP address press the front button on the base station to communicate its IP address to the handset.
- UserName and Password: Admin- admin, Password- admin
- Pin: 0000
- Click Confirm
Step 2: Account Tab
- Select Account tab. (or another unused account if Account 1 is in use).
- Account Active: On
- Label: Name Your Name
- Display Name: Displays on your telephone phone screen when idle.
- Register Name: Full DID eg 13106341794
- User Name: Full DID eg 13106341794
- Password: is the password associated with the phone number.
- Enable Outbound Proxy: Disabled
- Transport: TLS
- SIP Server 1: tls.2talk.com
- Port: 5061
- Server Expires: 180
- Voice Mail: *55
- NAT Traversal: Disabled
- Confirm: to Save
Step 3: Phone Tab
- Select Phone Tab
- Select Country: (eg Canada, Mexico, US-Pacific Time)
- Set Time Zone: -8 Canada Primary NTP >> us.pool.ntp.org Secondary NTP: au.pool.ntp.org (CONFIRM)
- DSS Keys: Phone Tab | DSS Key >> use this to assign a variety of standard functions to the T28 10 function keys on the right side of the phone.
- At bottom: Select Confirm
Step 4: Date and Time Settings
- Time Zone: eg -8 Canada
- Daylight Saving: Automatic
- Location: eg -8 Canada, Mexico, US_pacific Time
- Fixed Type: By Week
- Primary Server: us.pool.ntp.org
Step 5: Contacts
Contacts can be imported into the W52P from either as XML or CSV imports.